3fvape

Aici va puteti exprima parerile despre magazinele online si fizice din afara Romaniei.
Forum rules
In cadrul acestei sectiuni, utilizatorii sunt asteptati cu impresiile lor, pozitive sau negative, privitoare la magazinele de tigari electronice din afara Romaniei, dar:
- sunt asteptate pareri pozitive cat si negative
- nu se vor tolera reclamele ascunse
- incercati sa impartasiti experienta voastra, dar cautati sa fiti impartiali
Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Thu Oct 24, 2019 4:41 am

Original Timesvape Keen Hybrid Mechanical Mech Mod original price$79.00, now only$55.99
The Timesvape Keen Mechnical Mod is constructed from copper in 30mm diameter and powered by single 18650 / 20700 / 21700 Battery (Not included), featuring an floating contact pin with ball head for hard fitting. The tube itself is 30mm at its widest point, tapering to 25mm or 27mm at the top. The contact pin is gold plated with a flat smooth button spring.
Image
SOB V2 RDA Clone original price$9.99, now only$5.99
The SOB V2 RDA Clone is constructed from Stainless Steel and PC in 22mm diameter. The RDA features dual post build deck and supports side airflow control adjustable.
Image
Head V2 RDA Clone original price$9.99, now only$5.99
The Head V2 RDA Clone is constructed from 316 Stainless Steel and PC in 24mm diameter. The RDA features dual post build deck and supports side airflow control adjustable.
Image
Chronos RDA Clone original price$9.99, now only$5.99
The Chronos RDA Clone is a 24mm RDA constructed from stainless steel. It has a dual post build deck for easy coil building. The juice well is deep and the center pin is gold plated. The side airflow is adjustable for optimal flavor. Wide bore Ultem drip tip is included.
Image
Vertex V1 Cursed RDA Clone with BF Pin original price$9.99, now only$5.99
The Vertex V1 Cursed RDA Clone is constructed from Stainless Steel in 24mm diameter. The RDA features dual post build deck and supports side airflow control adjustable.
Image
Penodot RDA Clone $7.99
The Penodot RDA Clone is constructed from Stainless Steel in 24mm diameter. The RDA features dual post build deck and supports side airflow control adjustable.
Image
Original Venvii FITT-II 650mAh Pod System Starter Kit $14.99
The Venvii FITT-II Starter Kit has streamline body and small size, which makes it convenient and easy to use. The FITT-II Kit is especially designed with Honeycomb ceramic atomization coil, which fully covers smoke oil with 360 degrees, making the atomization effect more delicate and the taste more full. It is powered by built-in 650mAh battery that can provide you lasting one day vape and comes with a 2ml refillable pod with easy bottom refilling. What' more, multiple protections can provide you a safer vaping experience.
Image
Coppervape Replacement Diamond Tank Tube Top Cap + Drip Tip for Dvarw 22 MTL RTA $7.99
The Replacement parts consist of one 316 Stainless Steel Drip Tip and one PC Top Cap. The Top Cap features 22mm diameter and 4.5ml juice capacity. They are used for Dvarw 22 MTL RTA as replacement parts.
Image
Coppervape Auguse MTL RTA Replacement 316SS Base w/ PEI + 2 POM Mouthpiece 510 Drip Tip Set $3.99
The Drip Tip Set consists of one 316 Stainless Steel 510 Base, three 510 replacement drip tips: one is PEI 510 Drip Tip, two are POM 510 Drip Tip. They can be used for Coppervape Auguse MTL RTA as replacement spare parts.
Image
Original Venvii FITT-II Kit Replacement Empty Pod Cartridge(2 PCS) $5.99
The Venvii Replacement Empty Pod Cartridge is made of PCTG and comes with 2ml juice capacity. The Pod is designed for Venvii FITT-II Kit. 2 PCS / Pack.
Image



Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Fri Oct 25, 2019 4:35 am

Original Kangvape 420-2IN1 650mAh APV VV Box Mod $7.18
The Kangvape 420 2in1 APV VV Box Mod is powered by 650mAh built-in battery and feayures from 1ohm to 3ohm resistance range, providing you various vaping experience. The Box Mod has Voltage adjustable function, you can press the button to adjustable the output voltage: 3.2V / 3.5V / 3.8V. The Box Mod comes with a window for you to see the cartridge's status. The LED indicator can also show you the voltage mode. What's more, the air can switch directly and the pod that fit for can use for Thick oil / E-liquid / Nic salt. The multiple protections of this box mod will provide you a safe vaping experience.
Image
Gata MTL / DLH RTA Clone with Spare 2ml Tank $14.99
The Gata RTA Clone is constructed from stainless steel (body) and glass (tank) in 24mm diameter. The Gata RTA Clone comes with postless build deck for single coil and supports bottom airflow control to meet MTL and DLH lover different vaping needs.
Image
Original SMOKTech SMOK Nord 1100mAh Pod System Starter Kit $25.68
The SMOKTech SMOK Nord, is a button-triggered pod system device. It is powered by a built-in 1100mAh battery, which making it a definitely powerful one among pod system devices. It is equipped with two exclusive coils (Nord Mesh 0.6ohm coil and Nord regular 1.4ohm coil), one is perfect to get massive vapor while the other can offer excellent MTL experience. Its size is very comfortable to hold in hand, and it has a newly added button to start vaping and provide information about battery life, besides, there's an e-liquid window on the pod, all of which are for your convenience.
Image
SXK Monarch R RDTA Clone Replacement 1 Hole Airflow Insert + 3 Holes Airflow Insert(2 PCS) $5.90
The SXK Monarch R RDTA Clone replacement parts consist of one airflow insert is with 1 Hole and another one is with 3 Holes. 2 PCS / Pack.
Image
SXK Monarch R RDTA Clone Replacement Drip Tip + Tube + Top Cap $7.90
The SXK Monarch R RDTA Clone replacement parts consist of one Drip Tip, one Top Cap, and one Tube. They are made of PC material.
Image
YFTK Replacement Diamond Top Cap Tank Tube + Chimney for Dvarw 22 MTL RTA $6.99
The YFTK Replacement Diamond Top Cap is made of PC material and it is compatible with Dvarw 22 MTL RTA Atomizer as a replacement part. The Top Cap comes with a 316 Stainless Steel Chimney.
Image
Original Istar Volcanee DIY Tool Kit - Plier + Ceramic Tweezer + Brush + Scissors + Pointed Tweezer + Coil Jig + Screwdriver $10.99
The Istar Volcanee DIY Tool Kit is a useful tool set for RDA / RTA DIY coil building. It contains multifunction screwdriver, ceramic tweezer, pointed tweezer, coil jig, plier, folding scissors and coil brush. Coil Jig1.5 / 2.0 / 2.5 / 3.0 / 3.5.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Mon Oct 28, 2019 5:38 am

Original Hippovape Papua 100W VW Box Mod $29.95
The Hippovape Papua 100W Box Mod is powered by Single 18650 / 20700 / 21700 battery (Not included). It is a VW box mod constructed from Zinc Alloy. Equipped with the advanced waterproof chipset, it powers from 3W to 100W. It has 6 protections: low wattage protection, reverse polarity protection, overheating protection, short circuit protection, 10s cut off protection and low / high ohm protection. Its output voltage ranges from 1.0V to 8V and its resistance ranges from 0.1ohm to 3.0ohm.
Image
Original Hippopvape VIVA 245W VW Box Mod $35.99
The Hippovape VIVA Box Mod is a VW mod constructed from Zinc Alloy. Equipped with the advanced waterproof chipset, it powers from 10W to 245W and produces an outstanding power output accuracy by dual 18650 battery(Not included), which fires extremely fast. It has 6 protections: low wattage protection, reverse polarity protection, overheating protection, short circuit protection, 10s cut off protection and low / high ohm protection. Its output voltage ranges from 1.0V to 8.0V and its resistance ranges from 0.1ohm to 3.0ohm.
Image
Scar Mini Hybrid Mechanical Mod Clone $14.99
The Scar Mini Mechanical Mod Clone is constructed from Stainless Steel in 28mm diameter (largest) / 22mm diameter (top), which is powered by single 18350 battery (Not included). The magnet is height adjustable and allows the adjustment of the activation button movement. It is compatible with 510 threading connection.
Image
Coppervape BF-99 CUBE MTL RDTA Clone $19.99
The Coppervape BF-99 CUBE MTL RDTA Clone is constructed from 316 Stainless Steel (body) and PEI (tank) in 22mm diameter. The RDTA comes with a 2.5ml juice capacity PEI tank. The RDTA supports side airflow adjustable control and bottom refilling. The hole airflow provides a big vapor and great flavor. Two Air Plugs: "gold" 1 hole x 1.00mm, 0.79mm² (Pre-installed); "red" 2 holes x 1.00mm, 1.58mm². Drip tip: modular tip with 4mm or 6mm hole. The RDTA also supports Mouth to lung (MTL) vaping experience.
Image
Original Vandy Vape Mesh V2 RDA original price$34.99, now only$25.99
The Vandy Vape Mesh V2 RDA is constructed from stainless steel in 25mm diameter. The RDA comes with e-juice capacity. It adopts top airflow design for anti-leaking, which will bring you convenience. And with deeper indentation and wider M Wire, it will provide you with great flavor. Besides, it is compatible with 4 types of M Wire: 0.15ohm Dual M Coil, 0.15ohm Ni80 M Coil, 0.15ohm A1 M Coil and 0.12ohm SS316L M Coil, which will meet your different vaping needs.The Color of Drip Tip is random. This RDA comes with bottom feeder / BF / Squonk Pin
Image
Original Hippovape Papua 100W VW Box Mod + RDA Kit $37.99
The Hippovape Papua kit is constructed from Zinc Alloy and the Papua mod is equipped with the advanced waterproof chipset, its output power range is from 3W to 100W and produces an outstanding power output accuracy by 1 x 18650 / 20700 / 21700 battery (Not included) which fires extremely fast.The Resistance Range is from 0.1ohm to 3.0ohm and the atomizer size is 24mm. Included in the kit is the Papua RDA atomizer which is optimized by the ultimate airflow that providing large vapor production. With a POM single coil adapter attached, it can be single coil RDA which bring you better flavor.
Image
Original Goforvape Satisfy 50W 1300mAh VW Box Mod Pod System Starter Kit original price$45.00, now only$32.99
The Goforvape Satisfy VW box mod pod system starter kit is powered by a built-in 1300mAh battery that can be fully charged with the use of a USB Type-C port and 1A charging. The pod system kit is equipped with an OLED display screen for showing the detailed vaping data clearly. The Satisfy replacement pod features a top refilling 4ml E-liquid capacity with a removable drip tip and adjustable airflow located at the top of the pod. The multiple protections provide you a safer vaping experience. Goforvape Satisfy pod system kit is definitely a wonderful pod vape device to satisfy all your vaping needs and bring you an outstanding vaping experience, no matter for DTL and MTL vaping.
Image
Replacement Diamond Top Cap Tank Tube + Chimney for Flash e-Vapor V4 / V4.5 RTA Clone - Short Version $7.99
The replacement PEI Diamond Top Cap Tank Tube and Stainless Steel Chimney is suitable for Flash e-Vapor V4 / V4.5 RTA Clone. It comes with 3.5ml juice capacity.
Image
Replacement Diamond Top Cap Tank Tube + Chimney for Flash e-Vapor V4 / V4.5 RTA Clone $7.99
The replacement PEI Diamond Top Cap Tank Tube and Stainless Steel Chimney is suitable for Flash e-Vapor V4 / V4.5 RTA Clone. It comes with 5ml juice capacity.
Image
High End KS Kaser V2 SS Base + 3 Mouthpiece 510 Drip Tip + 6 Airflow Insert Set - Type A $5.99
High End KS V2 Replacement Set A consists of one Stainless Steel Base, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
High End KS Kaser V2 SS Base + 3 Mouthpiece 510 Drip Tip + 6 Airflow Insert Set - Type B $5.99
High End KS V2 Replacement Set B consists of one Stainless Steel Base, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
High End KS Kaser V2 SS Base + 3 Mouthpiece 510 Drip Tip + 6 Airflow Insert Set - Type C $5.99
High End KS V2 Replacement Set C consists of one Stainless Steel Base, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
High End KS Kaser V2 SS Base + 3 Mouthpiece 510 Drip Tip + 6 Airflow Insert Set - Type D $5.99
High End KS V2 Replacement Set D consists of one Stainless Steel Base, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Mon Oct 28, 2019 5:45 am

High End KS Kaser V2 SS Base + 3 Mouthpiece 510 Drip Tip + 6 Airflow Insert Set - Type E $5.99
High End KS V2 Replacement Set E consists of one Stainless Steel Base, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
Original Goforvape Satisfy Pod Kit Replacement GFV-EX1 Clapugatted Coil Head(5 PCS) original price$19.90, now only$12.99
The Goforvape Satisfy GFV-EX1 Clapugatted Coil is suitable for Goforvape Satisfy Pod Kit. The wattage range is from 30W to 60W and the resistance of this Coil is 0.35ohm. 5 PCS / Pack.
Image
Original Goforvape Satisfy Pod Kit Replacement GFV-EX2 Mesh Coil Head(5 PCS) original price$16.00, now only$7.99
The Goforvape Satisfy GFV-EX2 GFV EX2 Mesh Coil is suitable for Goforvape Satisfy Pod Kit. The wattage range is from 25W to 35W and the resistance of this Coil is 0.4ohm. 5 PCS / Pack.
Image
Original Goforvape Satisfy Pod Kit Replacement GFV-EX3 Mesh Coil Head(5 PCS) original price$16.00, now only$7.99
The Goforvape Satisfy GFV-EX3 GFV EX3 Mesh Coil is suitable for Goforvape Satisfy Pod Kit. The wattage range is from 16W to 25W and the resistance of this Coil is 0.6ohm. 5 PCS / Pack.
Image
Original Goforvape Satisfy Pod Kit Replacement GFV-EX4 Mesh Coil Head(5 PCS) original price$16.00, now only$7.99
The Goforvape Satisfy GFV-EX4 GFV EX4 Mesh Coil is suitable for Goforvape Satisfy Pod Kit. The wattage range is from 8W to 16W and the resistance of this Coil is 1.0ohm. 5 PCS / Pack.
Image
Original Goforvape Satisfy Pod Kit Replacement RBA Rebuildable Single Coil Head original price$12.00, now only$5.99
The Goforvape Satisfy RBA Rebuildable Single Coil is suitable for Goforvape Satisfy Pod Kit The RBA coil fits for DIY lover.
Image
Original Vandy Vape Mesh V2 RDA Replacement A1 M Coil Mesh Sheet(10 PCS) $3.99
The Vandy Vape A1 M Coil is suitable for Vandy Vape Mesh V2 RDA. The wattage range is from 50W to 65W and the resistance of this Coil is 0.15ohm. 10 PCS / Pack.
Image
Original Vandy Vape Mesh V2 RDA Replacement A1 Dual M Coil Mesh Sheet(10 PCS) $3.99
The Vandy Vape A1 Dual M Coil is suitable for Vandy Vape Mesh V2 RDA. The wattage range is from 45W to 70W and the resistance of this Coil is 0.15ohm. 10 PCS / Pack.
Image
Original Vandy Vape Mesh V2 RDA Replacement Ni80 M Coil Mesh Sheet(10 PCS) $3.99
The Vandy Vape Ni80 M Coil is suitable for Vandy Vape Mesh V2 RDA. The wattage range is from 55W to 70W and the resistance of this Coil is 0.15ohm. 10 PCS / Pack.
Image
Original Vandy Vape Mesh V2 RDA Replacement SS316L M Coil Mesh Sheet(10 PCS) $3.99
The Vandy Vape SS316L M Coil is suitable for Vandy Vape Mesh V2 RDA. The wattage range is from 50W to 70W and the resistance of this Coil is 0.12ohm. 10 PCS / Pack.
Image

----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Tue Oct 29, 2019 5:16 am

Original CoolVapor Takit Mini V2 Semi-Mechanical Mod original price$39.90, now only$34.55
The CoolVapor Takit Mini V2 Semi-Mechanical Mod is constructed from stainless steel and powered by single 18350 / 18650 battery (Not included).The height of this mechanical mod is 78mm and is with a short-circuit protection chip board.
Image
Original Timesvape Saint Hybrid Mechanical Mech Mod $29.99
The Timesvape Saint Hybrid Mechanical Mod is constructed from brass with a diameter of 24mm and 94mm height. The mech mod is powered by single 18650 / 20700 / 21700 batteries. (Not included)
Image
YFTK Bastard MTL / DTL RTA Clone $19.99
The YFTK Bastard RTA Clone is constructed from 316 Stainless Steel in 22mm diameter. It features a single coil build deck. The RTA comes with a 3.5ml juice capacity tank tube and supports bottom modular airflow control and top filling system. The RTA can provide you MTL or DTL vaping experience. The RTA also can be converted to a RDA by conversion kit. (Not included)
Image
ShenRay Value Greek MTL RTA Clone $30.99
The ShenRay Value Greek MTL RTA Clone is constructed from 316 stainless steel (Body) and glass (Tank) in 22mm diameter. The RTA supports top refilling system and adjustable bottom airflow and it comes with a 4ml juice capacity tank. It can provide you mouth-to-lung (MTL) vaping experience.
Image
YFTK Bastard RTA Clone to RDA Replacement Conversion Kit with BF Pin $9.99
The YFTK Replacement Conversion Kit is constructed from 316 Stainless Steel in 22mm diameter. It can be used to convert your Bastard RTA Clone to RDA.
Image
Original Goforvape Ni80 Handmade Alien Heating Resistance Wire Pre-built Coil for RDA / RTA(2 PCS) $2.59
The Goforvape GFV-C2001 Ni80 Handmade Alien Heating Resistance Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA x 3 + 36GA gauge and 0.3ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Handmade Framed Staple Alien Wire Pre-built Coil for RTA(2 PCS) $3.99
The Goforvape GFV-C2002 Ni80 Handmade Framed Staple Alien Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features (0.1 x 0.3) x 8 + 36GA gauge and 0.26ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Handmade Framed Staple Alien Heating Wire Pre-built Coil for RTA(2 PCS) $3.99
The Goforvape GFV-C2003 Ni80 Handmade Framed Staple Alien Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA + Flat (0.1 x 0.3) x 4 + 28GA + 36GA gauge and 0.28ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Staggered Framed Staple Wire Pre-built Coil(2 PCS) $7.99
The Goforvape GFV-C2004 Ni80 Handmade Staggered Framed Staple Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA x 2 + (0.1 x 0.4) x 6 + 38GA gauge and 0.25ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Triple Staggered Claptons Wire Pre-built Coil for RDA / RTA(2 PCS) $7.99
The Goforvape GFV-C2005 Ni80 Handmade Triple Staggered Claptons Heating Resistance Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features (26GA + 38GA) x 3 + 38GA gauge and 0.29ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Staple Aliens Wire Pre-built Coil for RTA(2 PCS) $7.99
The Goforvape GFV-C2006 Ni80 Handmade Staple Aliens Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 26GA x 2 + Flat (0.1 + 0.5) x 6 + 38GA gauge and 0.18ohm resistance value per feet, which will be a good choice for DIY.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Tue Oct 29, 2019 5:23 am

Original Goforvape Ni80 Handmade Aliens Heating Wire Pre-built Coil for RDA / RTA(2 PCS) $6.59
The Goforvape GFV-C2007 Ni80 Handmade Aliens Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA x 3 + 38GA gauge and 0.35ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Handmade Aliens Heating Wire Pre-built Coil for RDA / RTA(2 PCS) $6.59
The Goforvape GFV-C2008 Ni80 Handmade Aliens Heating Resistance Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features (27GA x 3) + 38GA gauge and 0.25ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Raging Fire Heating Wire Pre-built Coil for RDA / RTA(10 PCS) $6.29
The Goforvape GFV-C2009 Ni80 Raging Fire Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA + 40GA x 48 gauge and 0.18ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 3 Core Fused Clapton Heating Wire Pre-built Coil for RDA / RTA(10 PCS) $2.59
The Goforvape GFV-C2010 Ni80 3 Core Fused Clapton Heating Resistance Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA x 3 + 38GA gauge and 0.25ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 4 Core Fused Clapton Heating Wire Pre-built Coil for RDA / RTA(10 PCS) $2.59
The Goforvape GFV-C2011 Ni80 4 Core Fused Clapton Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features 28GA x 4 + 38GA gauge and 0.2ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Gatlin Heating Wire Pre-built Coil for RTA(10 PCS) $3.59
The Goforvape GFV-C2012 Ni80 Gatlin Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features (0.1 + 0.4 + 0.5 x 2) + Flat (0.1 x 0.4) gauge and 0.15ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Staple Staggered Fused Clapton Wire for RTA(10 PCS) $6.59
The Goforvape GFV-C2013 Ni80 Staple Staggered Fused Clapton Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features Flat (0.1 x 0.3) x 2 + 28GA x 3 + 38GA + 28GA x 2 + 38GA gauge and 0.2ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Framed Staple Staggered Fused Clapton Wire Pre-built Coil(10 PCS) $3.99
The Goforvape GFV-C2014 Ni80 Framed Staple Staggered Fused Clapton Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features Flat (0.1 x 0.3) x 2 + 28GA x 3 + 38GA + 28GA x 2 + 38GA gauge and 0.27ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Ni80 Braided Fused Staple Clapton Wire Pre-built Coil for RDA / RTA(10 PCS) $3.99
The Goforvape GFV-C2015 Ni80 Braided Fused Staple Clapton Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Ni80 material. It features Flat (0.1 x 0.3) x 8 + 36GA + 38GA x 16 gauge and 0.26ohm resistance value per feet, which will be a good choice for DIY.
Image
Original Goforvape Kanthal A1 Ant Clapception Heating Wire Pre-built Coil for RDA / RTA(10 PCS) $3.59
The Goforvape GFV-C2016 Kanthal A1 Ant Clapception Heating Wire is perfect for RDA / RTA / RDTA / RSA atomizers. The wire is made from Kanthal A1 material. It features Flat (0.1 x 0.3) x 8 + 36GA + 38GA x 16 gauge and 0.4ohm resistance value per feet, which will be a good choice for DIY.
Image

----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Wed Oct 30, 2019 4:36 am

Original Timesvape Dreamer Mechanical Mech Mod $27.99
The Dreamer Mechanical Mech Mod was designed in the USA by Stan at TenaciousTXVapes, manufactured by Timesvape. The Timesvape Dreamer Mech Mod is constructed from Aluminum material, it is a hard-hitting single tube mech which is powered by a single 18650, 20700 or 21700 battery(Not included), and has a unique multi-point contact pin for increased conductivity. The tube itself is 27mm at its widest point, tapering to 25mm at the top. The tube is reversible, so you can customize the grip to suit your preferences. The copper contact pin is also silver-plated for a perfect connection every time.
Image
Kindbright Katana 3D Print Semi-Mechanical Box Mod Stealth Clone $50.99
The Kindbright Katana Box Mod Stealth Clone is constructed from Nylon and Stainless Steel material, which is powered by single 18650 battery (Not included).You only switch on this box mod by press 5 times the button. The Box Mod Stealth fits for all lovers of MTL vaping and it is compatible with atomizers with a maximum diameter of 24mm.
Image
C2MNT V2 RDA Clone with BF Pin $6.99
The C2MNT V2 RDA Clone is constructed from stainless steel in 24mm diameter. The RDA comes with a postless deck and top cap heat sink design, which supports signature blade Airflow Control (AFC). It is compatible with the layer cake deck. This RDA comes with bottom feeder / BF / Squonk Pin.
Image
LE TBO MTL RDA Clone with BF Pin $12.59
The LE TBO RDA Clone is constructed from 316 Stainless Steel measuring in 22mm diameter. The RDA has a special design in the vertical positioning of the coil, it allows you freely regulate the space of your coil and the position of your cotton. And then, there are multiple airflow positions associated with the external ring to find precision with your preferred pull and sublimates all your E-juice, which allows you to pass from aired inhaling to a restrained depending on your tastes and compositon of E-juice. The RDA supports MTL vaping experience and is compatible with most of boxes and mods equipped with 22mm diameter atomizers. This RDA comes with bottom feeder / BF / Squonk Pin.
Image
Original Timesvape 1000mAh Wave Mini Salty Kit + Tank Atomizer with 1.2ohm Ceramic Coil $21.99
The Timesvape Wave Mini Salty Kit is a vape pen kit with a portable and ergonomic shape. The Wave mini battery is powered by a 1000mAh built-in battery with Micro-USB charging and can reach a voltage range from 3.4V to 4.4V that is conducive to produce optimal vaping with sufficient power and pure taste. The Wave Mini Tank comes with a 1.8ml straight tube (with a extra 2ml bubble tube) and a 1.2ohm ceramic coil (Best: 8~12W) for optimum taste. What's more, the Wave Mini tank comes with top filling design that prevent effectively from oil leakage. And it is compatible with the ceramic coil for stable and long-lasting foaming. The Timesvape Wave Mini Kit is also easy to install and replace the coil. The Timesvape Wave Mini Kit has also multiple protections for your safe vaping experience.
Image
Original Smoant Pasito 25W 1100mAh Mod Pod System Starter Kit $25.99
The Smoant Pasito Kit is made of CPR and aluminum alloy material, resulting in a more colorful and durable stunning finish. Powered by a built-in 1100mAh battery and assisted by the new ANT chip, it allows for 5 output levels within 10-25W and lasts a long vaping time. The battery is charged via the Type C USB port on the bottom of the device. And there are intelligent LED lights that will show the battery level clearly. As for the pod, it can store up to 3ml of e-juice and features an adjustable top airflow and refill system, which prevents leaking problems and guarantees the easy operation of the device. A 1.4ohm MTL Ni-80 Coil and a 0.6ohm DTL Mesh Coil are included with purchase, but you may also purchase a rebuildable coil separately. Anyway, the Pasito is worth a shot.
Image
Original DEJAVU Neon 80W TC VW Box Mod with Neon Atomizer Tank Kit $69.99
The DEJAVU Neon TC VW Box Mod Kit is designed in an original square shape with rounded edges, It is powered by a single 18650 battery (Not included) and the innovative RoninX RX-80 chipset, which can achieve a high output range from 5W to 80W. A variety of operating modes (such as power mode, TC Modes, voltage mode, curve mode) can meet your different e-cigarette needs. By the function of 5V / 2A input current, the Neon can easily be charged fast. The outer casing is made of polished ABS plastic, the DEJAVU Neon combines sturdy construction and lightweight texture in a compact unit. The control panel is also clean and neat. Not a small trigger button, the lower 0.96 inch IPS color display makes it easy to know the state of the battery, and even the lower three-button design brings great convenience to the operation. The accompanying DEJAVU Neon Tank is a 2-in-1 atomizer. It supports conventional 0.3ohm mesh coils and RBA coils. The electronic juice is filled from the top and there is a swirling airflow adjustment at the bottom.
Image
Original Dazzvape BOTO Concentrate Vaporizer Replacement Microporous Quartz Coil(2 PCS) $5.49
The BOTO Replacement Coil is designed for Dazzvape BOTO Concentrate Vaporizer Kit. It comes with 1.2ohm microporous quartz coil, which can prevents dry hits and has advanced thermal conductivity. With the extended coil design, it is much easier to dip concentrates and unique flat design enlarges concentrates contact area. What's more, the detachable design makes it easy to replace or clean. 2 PCS / Pack.
Image
Original Veeape Replacement Coil Head for V19 Tank Atomizer / Keybox Mod(3 PCS) $9.99
The Veeape Replacement Coil is designed for Veeape V19 Atomizer, it features a 1.5ohm coil resistance. 3 PCS / Pack.
Image
Original Veeape Vplus Pod Kit Replacement Pod Cartridge with 1.3ohm Ceramic Coil(3 PCS) $8.99
The Veeape Replacement Pod Cartridge Atomizer is designed for Veeape Vplus Pod Kit, it features a 1.2ml juice capacity and 1.3ohm ceramic coil. The Veeape Vplus Atomizer injects liquid through the top and pumps the 1.2ml tank 250 to 300 times per injection of liquid. 3 PCS / Pack.
Image
Original Veeape V19 Atomizer Replacement Pod Cartridge with 1.5ohm Coil for Ploomtech First Generation Mod / Keybox Mod $6.99
The Veeape V19 Atomizer Pod Cartridge is designed for the Ploomtech first generation mod and Veeape Keybox Mod. It comes with a 1.0ml E-liquid capacity and features the leak-proof function. The V19 Atomizer adopts 1.5ohm coil to provide for you with excellent vaping experience. What's more, the V19 Atomizer is suitable for regular juice to meet your different vaping needs.
Image

----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Thu Oct 31, 2019 4:52 am

Original Timesvape Dreamer Mechanical Mech Mod $27.99
The Dreamer Mechanical Mech Mod was designed in the USA by Stan at TenaciousTXVapes, manufactured by Timesvape. The Timesvape Dreamer Mech Mod is constructed from Aluminum material, it is a hard-hitting single tube mech which is powered by a single 18650, 20700 or 21700 battery (Not included), and has a unique multi-point contact pin for increased conductivity. The tube itself is 27mm at its widest point, tapering to 25mm at the top. The tube is reversible, so you can customize the grip to suit your preferences. The copper contact pin is also silver-plated for a perfect connection every time.
Image
Original Eleaf iStick Amnis 2 23W 1100mAh Battery Box Mod $17.09
The iStick Amnis 2 Battery Mod is specially designed for iStick Amnis 2 Kit. It comes with 1100mAh built-in battery with 23W max output, which could provide you with a long time vaping experience. And there are 5 different working modes for your option: Bypass / Low power / Medium Power / High Power / Maximum Power. What' more, the box mod is equipped with easy to carry lanyard, it utilizes Type-C USB port for easy and safe operation.
Image
SXK Bastard MTL / DTL RTA Clone original price$19.90, now only$14.99
The SXK Bastd RTA Clone is constructed from 316 Stainless Steel in 22mm diameter. It features a single coil build deck. The RTA comes with a 3.5ml juice capacity tank tube and supports bottom modular airflow control and top filling system. The RTA can provide you MTL or DTL vaping experience. The RTA also can be converted to a RDA by conversion kit. (Not included)
Image
Original Vaporesso SWAG II 80W VW Box Mod with NRG PE Tank Atomizer Kit $47.99
The Vaporesso SWAG II Kit consists of 80W SWAG II Battery Box Mod and NRG PE MINI Tank atomizer. The SWAG II Mod Kit is powered by single 18650 battery. (Not included) By adopting a special formulated rubber coating, it is now even lighter and more durable, with a hand feel that will give you next level comfort. Equipped with AXON Chip, the SWAG II Kit brings you the incredible Pulse mode, giving you 5x more power in every inhalation. The upgraded GT4 Meshed coil brings dual meshed cores to increase contact area giving denser more flavorful clouds.
Image
Original Eleaf iStick Amnis 2 1100mAh Box Mod Battery with GTiO Tank Kit $35.13
The iStick Amnis 2 Kit consists of iStick Amnis 2 Box Mod Battery and Amnis 2 GTiO Tank Atomizer, which is powered by 1100mAh built-in battery with 23W max output and features 1.8ml / 3ml e-juice capacity. And it supports 0.6ohm GT M coil and 1.2ohm GT Coil for nicotine salt, which will bring you a better vaping experience. What's more, the Kit is equipped with easy to carry lanyard, it utilizes Type-C USB port for easy and safe operation.
Image
Original Eleaf iStick Amnis 2 1100mAh Box Mod Battery with GTiO Tank Kit(Basic Version) $33.97
The iStick Amnis 2 Kit consists of iStick Amnis 2 Box Mod Battery and Amnis 2 GTiO Tank Atomizer, which is powered by 1100mAh built-in battery with 23W max output and features 1.8ml / 3ml e-juice capacity. And it supports 0.6ohm GT M coil and 1.2ohm GT Coil for nicotine salt, which will bring you a better vaping experience. What's more, the Kit is equipped with easy to carry lanyard, it utilizes Type-C USB port for easy and safe operation. This is Basic Version
Image
Original Eleaf iStick Amnis 2 1100mAh Box Mod Battery with GS Drive Tank Kit $31.65
The iStick Amnis 2 Kit consists of iStick Amnis 2 Box Mod Battery and GS Drive Tank Atomizer. The Kit is powered by 1100mAh build-in battery with USB type-C charging. Also, it comes with 1.8ml e-juice capacity (can changeable to 3ml), which can provide you a last vaping experience. The childproof and lanyard design will create a safe and convenience vaping. Mesh Coil can provide you a better flavor feeling.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Thu Oct 31, 2019 4:57 am

SXK Monarch R RDTA Repalcement Tank Tube Clone $1.49
The SXK Repalcement Tank Tube is made of glass, it is designed for SXK Monarch R RDTA as a replacement part.
Image
CG SS 510 Base Deck + 3 Mouthpiece Drip Tip + 6 Airflow Insert Set - Type A $5.99
CG Replacement Set A consists of one Stainless Steel Base Deck, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
CG SS 510 Base Deck + 3 Mouthpiece Drip Tip + 6 Airflow Insert Set - Type B $5.99
CG Replacement Set B consists of one Stainless Steel Base Deck, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
CG SS 510 Base Deck + 3 Mouthpiece Drip Tip + 6 Airflow Insert Set - Type C $5.99
CG Replacement Set C consists of one Stainless Steel Base Deck, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
CG SS 510 Base Deck + 3 Mouthpiece Drip Tip + 6 Airflow Insert Set - Type D $5.99
CG Replacement Set D consists of one Stainless Steel Base Deck, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
CG SS 510 Base Deck + 3 Mouthpiece Drip Tip + 6 Airflow Insert Set - Type E $5.99
CG Replacement Set E consists of one Stainless Steel Base Deck, three mouthpiece 510 drip tips (White: POM; Black: POM; Brown: PEI) and six airflow inserts (hole diameter: 1.5mm / 2.0mm / 2.5mm / 3.0mm / 3.5mm / 4.0mm). They are used as replacement parts.
Image
SXK Replacement Tank Tube for Bastard MTL / DTL RTA Clone original price$6.90, now only$4.99
The SXK Replacement Tank Tube is made of PEI, it comes with 3.5ml juice capacity. The Tank Tube is suitable for Bastard MTL / DTL RTA Clone.
Image
SXK Bastard RTA Clone to RDA Replacement Conversion Kit with BF Pin original price$12.90, now only$9.99
The SXK Replacement Conversion Kit is constructed from 316 Stainless Steel in 22mm diameter. It can be used to convert your Bastard RTA Clone to RDA.
Image

----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Fri Nov 01, 2019 4:51 am

Original Timesvape Keen Hybrid Mechanical Mech Mod original price$75.35, now only$65.99
The Timesvape Keen Mechnical Mod is constructed from Stainless Steel in 30mm diameter and powered by single 18650 / 20700 / 21700 Battery (Not included), featuring an floating contact pin with ball head for hard fitting. The tube itself is 30mm at its widest point, tapering to 25mm or 27mm at the top. The contact pin is gold plated with a flat smooth button spring.
Image
Original Timesvape Keen Hybrid Mechanical Mech Mod original price$66.09, now only$56.99
The Timesvape Keen Mechnical Mod is constructed from Stainless Steel in 30mm diameter and powered by single 18650 / 20700 / 21700 Battery (Not included), featuring an floating contact pin with ball head for hard fitting. The tube itself is 30mm at its widest point, tapering to 25mm or 27mm at the top. The contact pin is gold plated with a flat smooth button spring.
Image
Original Hellvape MD MTL RTA original price$39.99, now only$29.99
The Hellvape MD RTA is constructed from stainless steel (body) and glass (tank tube) in 24mm diameter, it features 6 adjustable bottom airflow for two MTL modes and it comes with two insert slots and honeycomb airflow turntable to meet differenrt vaping needs. The e-juice capacity is 2ml (straight glass) or 4ml (bubble glass) with child-proof push style top-refilling system. Also, MD RTA comes with two kinds of 510 drip tip for you to choose.
Image
Original Hellvape GRIMM 30W 1200mAh VW Box Mod Pod System Starter Kit original price$59.99, now only$39.99
The Hellvape GRIMM VW Box Mod Pod System Starter Kit is the resulting efforts of collaboration between Hellvape, Grimm Green, and Ohm Boy. The Pod Kit is powered by 1200mAh built-in battery, power output range from 5 to 30W, and comes with a 3ml refillable pod with replaceable coils. Crafted from protective Zinc-alloy and PCTG materials, the GRIMM Pod System is moderately impact resistant, preventing unsightly markings from damaging the box mod. Firing in both a wattage and voltage output, the GRIMM Pod Kit can be tailored to the specific usage of a particular individual, reaching up to 4.6V and 30W, respectively. This allows the GRIMM 30W Pod Kit to be used with plastic food-grade pod, providing a large 3ml capacity, and can accept coils made for the GRIMM Pod Set, clocking in at either 0.7ohm Mesh or can use a 1.2ohm Regular Coil. Refilled in a sliding top fill system, the Hellvape GRIMM will definitely last through any future vape sessions.
Image
Original GeekVape Aegis Boost 40W 1500mAh VW Box Mod Pod System Starter Kit original price$49.99, now only$32.99
The Geekvape Aegis Boost VW Box Mod Pod System Starter Kit is Specially designed for Pod and RDTA, it also supports MTL and DTL vaping experience. The Pod Kit is powered by a built-in 1500mAh battery, it can support the usage of both Pod and RDTA up to 40W. Equipped with IP67, the pod mod is stain-resistant, corrosion-resistant and tear-resistant. It's definitely the lightest yet toughest pod mod. Featuring easy-to-fill design and easy airflow design, the Aegis Boost Pod Kit is highlighted by its easy access top filling and its easy access airflow valve. It can bring you a great visual enjoyment with elegant appearance and concise design and with extraordinary vaping experience.
Image
Original Innokin Endura T18II 1300mAh Battery with Prism T18 Sub-Ohm Tank Starter Kit $29.99
The Innokin Endura T18ii Starter Kit consists of Endura T18ii Vape Pen Battery and Prism T18 Tank. The Endura T18ii is powered by built-in 1300mAh battery and comes with 2.5ml juice capacity. The T18ii also features a re-designed firing / power button that gives this device a more modernized and distinct look. You can use this same button for easy wattage select from Cool at 10.5W, to Mid at 12W, to Warm at 13.5W. Three LED lights above the firing button will indicate which wattage mode you have selected. Equipped with all the necessary safety features, the Endura T18ii is charged through an industry standard Micro-USB port. Attached to the Ednura T18ii Mod by a threaded 510 connection is the Prism T18 Tank, composed of superior Stainless Steel and durable Pyrex glass. Near the base of the tank is a four air holes inside an adjustable airflow ring so you can get the draw you desire by closing one hole at a time. With a convenient top-filling method, this device has a threaded top cap for access to a 2.5ml e-liquid capacity glass reservoir. Inside this glass tube is a pre-installed 1.5 ohm coil with a 14W maximum output so you can get a smooth, flavorful, low wattage vape. For the drip tip of the Prism T18, Innokin has included a hygienic magnetic cap to keep it clean and free of debris. This pocket-friendly feature is also capable of sticking onto the bottom of your T18ii pen so you dont have to worry about loosing it during your sessions.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Fri Nov 01, 2019 4:56 am

Original ThinkVape Replacement Mesh Coil for ZETA Kit / ZETA Pod(5 PCS) $9.99
The Think Vape Replacement Mesh Coil is designed for Think Vape ZETA Kit or Think Vape ZETA Pod. It features 0.5ohm coil resistance. 5 PCS / Pack.
Image
Original ThinkVape Replacement Mesh Coil for ZETA Kit / ZETA Pod(5 PCS) $9.99
The Think Vape Replacement Mesh Coil is designed for Think Vape ZETA Kit or Think Vape ZETA Pod. It features 0.2ohm coil resistance. 5 PCS / Pack.
Image
Original ThinkVape Replacement Regular DC Coil for ZETA Kit / ZETA Pod(5 PCS) $9.99
The Think Vape Replacement Regular DC Coil is designed for Think Vape ZETA Kit or Think Vape ZETA Pod. It features 1.0ohm coil resistance. 5 PCS / Pack.
Image
Original GeekVape Aegis Replacement Coil for Aegis Boost Kit / Pod(5 PCS) original price$14.99, now only$10.99
The GeekVape Aegis Replacement Coil is designed for Aegis Boost Kit / Aegis Boost Pod. It features 0.6ohm coil resistance. 5 PCS / Pack.
Image
Original GeekVape Aegis Replacement Coil for Aegis Boost Kit / Pod(5 PCS) original price$14.99, now only$10.99
The GeekVape Aegis Replacement Coil is designed for Aegis Boost Kit / Aegis Boost Pod. It features 0.4ohm coil resistance. 5 PCS / Pack.
Image
Original GeekVape Aegis Replacement Pod Cartridge for Aegis Boost Kit / Pod original price$14.99, now only$8.99
The GeekVape Aegis Replacement Pod Cartridge is designed for Aegis Boost Kit / Aegis Boost Pod. It comes with 3.7ml juice capacity and it is compatible with 0.4ohm or 0.6ohm coil.
Image
Original HorizonTech Replacement Bubble Tank Tube for Falcon II Tank $2.99
The HorizonTech Replacement Bubble Tank Tube is designed for Falcon II Sub Ohm Tank. It comes with 5.5ml juice capacity.
Image
Original Timesvape Keen Mechanical Mech Mod Extend Stacked Tube $26.99
The Timesvape Keen Mechanical Mech Mod Extend Stacked Tube is contructed from Copper and Extend Stacked Tube can extend the height of the Keen Mod and makes it can be powered by dual 18650 / 20700 / 21700 batteries. (Not included)
Image
Original Timesvape Keen Mechanical Mech Mod Extend Stacked Tube $27.99
The Timesvape Keen Mechanical Mech Mod Extend Stacked Tube is contructed from Copper and Extend Stacked Tube can extend the height of the Keen Mod and makes it can be powered by dual 18650 / 20700 / 21700 batteries. (Not included)
Image

----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Sat Nov 02, 2019 4:54 am

Match Stick Hybrid Mechanical Mod Clone $20.99
The Match Stick Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by Single 18650 battery (Not included). It features 510 hybrid top cap and spring fire button.
Image
Coppervape Hussar Single Coil RTA Clone with Mirco PEI Tank $18.99
The Coppervape Hussar Single Coil RTA Clone is constructed from 316 Stainless Steel (body) and PEI (tank tube) in 22mm diameter. The RTA comes with a 2.5ml juice capacity tank tube, which supports bottom adjustable airflow (2.5mm airflow post inside; 2.0mm airflow post in spare kit) and juice control.
Image
Caiman MTL RDTA Clone $18.99
The Caiman MTL RDTA Clone is constructed from stainless steel (body) and PC (tank) in 22mm diameter. The RDTA supports air feed adjustment, coming with a adjustable central connector screw and it is esay to E-liquid tank filling. Also, the RDTA can replaceable air pipes with different diameters. The inner surface of the atomizing chamber cap has a hemispherical shape which can hold some amount of liquid when the atomizer is turned over (similar to a no-spill cup). What's more, Milled stands is easy for coil clamping.
Image
Original Wismec PREVA 1050mAh Box Mod Battery Starter Kit with Pod Cartridge(Pod Version) $35.00
The Wismec PREVA Kit is a new intelligent Pod device. Powered by home-made advanced chip, this kit boasts its compact size and stylish appearance with fascinating glass panel and offering great portability and visual enjoyment. Featuring 1050mAh built-in battery, optional cartridges and various power modes, which will definitely provide incomparable vaping experience. Compatible with SS316 Dual 0.25 cartridge, absorbing e-liquid more fully and offering you more pure flavor. This is Pod Cartridge Version
Image
Original Wismec PREVA 1050mAh Box Mod Battery Starter Kit with Pod Cartridge(Standard Version) $36.50
The Wismec PREVA Kit is a new intelligent Pod device. Powered by home-made advanced chip, this kit boasts its compact size and stylish appearance with fascinating glass panel and offering great portability and visual enjoyment. Featuring 1050mAh built-in battery, optional cartridges and various power modes, which will definitely provide incomparable vaping experience. Compatible with standard cartridge. Standard cartridge uses Mesh 0.6ohm coil and mesh cotton, absorbing e-liquid more fully and offering you more pure flavor. This is Standard Cartridge Version
Image
Original Goforvape Monsterwix Organic Pre-loaded Cotton for RBA / RDA / RTA / RDTA Atomizer(30 PCS) $2.99
The Goforvape Monsterwix Cotton is premium organic cotton. It is compatible with all kinds of RBA / RDA / RTA / RDTA Atomizers. Best choice for DIY lovers. 30 PCS / Pack.
Image
Original Goforvape Flavorbeast Organic Cotton for RBA / RDA / RTA / RDTA Atomizer(10g) $2.99
The Goforvape Flavorbeast Cotton is premium organic cotton. It is compatible with all kinds of RBA / RDA / RTA / RDTA Atomizers. Best choice for DIY lovers. 0.36 Oz (10g) / Pack.
Image
Coppervape Replacement Diamond Top Cap Tank Tube + Chimney for Flash e-Vapor V4.5 RTA Clone - Short Version $7.99
The Coppervape replacement PC Diamond Top Cap Tank Tube and 316 Stainless Steel Chimney is suitable for Flash e-Vapor V4.5 RTA Clone. It comes with 3.4ml juice capacity.
Image
Coppervape Replacement Diamond Top Cap Tank Tube + Chimney for Flash e-Vapor V4.5 RTA Clone - Long Version $7.99
The Coppervape replacement PC Diamond Top Cap Tank Tube and 316 Stainless Steel Chimney is suitable for Flash e-Vapor V4.5 RTA Clone. It comes with 4.8ml juice capacity.
Image
YFTK Replacement Middle Top Cap for YFTK / SXK Haku Xeta Inside RBA Clone $4.99
The YFTK Replacement Middle Top Cap is made of PEI, which is suitable for YFTK / SXK Haku Xeta Inside RBA Clone as a replacement part.
Image
Original Ohm Vape AIO RBA Coil Head + Pod Cartridge for Ohm Vape AIO / Dotmod AIO Pod Kit $10.99
The Original Ohm Vape AIO Pod System Replacement Pod Cartridge with RBA Coil Head is compatible with Ohm Vape AIO Pod System Kit / Dotmod AIO Pod Kit.
Image
YFTK Haku Xeta Inside RBA Rebuildable Atomizer Clone for Billet Box Mod Kit $25.99
The YFTK Haku Xeta RBA Clone is constructed from Titanium Alloy and ultem. This RBA consists 510 chimney section, airdraw insert, elevating coil clamp system, airflow disk, wick channel controller pin, and air intake. It is suitable for BB Box Mod Kit.
Image
----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Mon Nov 04, 2019 5:04 am

Original Vaporesso SWAG II 2 80W Variable Wattage Box Mod $32.99
The Vaporesso SWAG II 80W VW Box Mod is powered by Single 18650 battery (Not included), the maximum output can reach up to 80W and equipped with a high-quality 0.91-inch OLED screen. Furthermore, the AXON Chip inside brings you the incredible PULSE mode, giving you ultimate vaping experience and next-level comfort. In the pulse mode, AXON will continuously hit you throughout your puff (every 0.02s) - not just from the initial fire - bringing you more powerful, flavorful clouds with every puff.
Image
Original Sikary Vapor OG Disposable Sub Ohm Tank Clearomizer(3 PCS) $10.99
The Sikary Vapor OG Sub Ohm Tank is a disposable clearomizer that comes with 3ml juice capacity and a 0.15ohm mesh coil for 40W to 70W output. The Sikary OG tank has a top fill system that uses a fully removable silicone plug. The OG has two 8mm by 3mm air slots that can be fully adjusted by rotating the outer barrel of the tank. The entire body of the OG is made of acrylic, except for the coil head and the gold-plated contact. 3 PCS / Pack.
Image
Original Hcigar KRIS 650mAh Refillable Pod System Starter Kit $19.99
The Hcigar KRIS Refillable Pod Kit is powered by 650mAh built-in battery and adopts advanced condensate reflux technology to prevent inhaling e-juice and the exclusive patented pneumatic siphon technology can avoid airflow through harmful components carried by electronic products. The pod kit comes with 2.0ml juice capaciy pod and 1.8ohm resistance coil. Featuring four vibration reminders function: insert pod, 15 puffs, charging, inhale over 10s. The KRIS Refillable Pod Kit will bring you the most convenient vaping experience. What' more, the pod kit is equipped with 5 protections to provide a safer vaping experience for you.
Image
Match Stick Hybrid Mechanical Mod Clone + Battle RDA Kit $27.99
The Match Stick Mechanical Mod Kit Clone consists of Match Stick Hybrid Mechanical Mod Clone and Battle RDA Atomizer, which are constructed from brass in 24mm diameter. It is powered by Single 18650 battery (Not included). It features 510 hybrid top cap and spring fire button.
Image
Original Lost Vape Orion Q 950mAh AIO Pod System Starter Kit with KTR Orion Pod Cartridge $34.99
The Lost Vape Orion Q AIO Pod System Starter Kit features a proprietary chipset with 17W max output and is powered by 950mAh built-in battery, and coming with a 1.0ohm KTR Orion Pod and 2ml refillable pod cartridge. The Lost Vape Orion Q Edition retains all the intricate details of the Orion DNA GO, such as premium alloy shell and stunning carbon fiber or resin details to craft a high-end all-in-one (AIO) pod system. The key difference resides in the chipset, implementing a refined output presets with multiple output adjustments without customization functionality. The Orion Q AIO pod kit equippe with multiple protections will provide you with a safe vaping experience.
Image
Original Vandy Vape Kylin M RTA Replacement Straight Tank Tube $2.59
The Vandy Vape Repalcement Straight Tank Tube is designed for Vandy Vape Kylin M RTA as a replacement part, which is made of glass and it comes with 3ml juice capacity.
Image
Original Vandy Vape Kylin M RTA Replacement Bubble Tank Tube $2.99
The Vandy Vape Repalcement Bubble Tank Tube is designed for Vandy Vape Kylin M RTA as a replacement part, which is made of glass and it comes with 4.5ml juice capacity.
Image
Original Lost Vape Orion DNA GO Replacement Pod Cartridge with 0.3ohm Mesh Coil(2 PCS) $8.99
The Lost Vape Repalcement Pod Cartridge is designed for Lost Vape Orion DNA GO Pod Kit as a replacement part, it comes with 2ml juice capacity and 0.3ohm coil resistance (mesh coil).
Image
Original Lost Vape Orion Q Replacement Pod Cartridge with 0.8ohm Mesh Coil(2 PCS) $8.99
The Lost Vape Repalcement Pod Cartridge is designed for Lost Vape Orion Q Pod Kit as a replacement part, it comes with 2ml juice capacity and 0.8ohm coil resistance (mesh coil).
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Tue Nov 05, 2019 4:47 am

Original asMODus Tribeaut 80W TC VW APV Box Mod original price$69.99, now only$48.99
The Tribeaut is an 80W Box Mod that features an ergonomic design and an easy-to-use operating system. The Tribeaut vape box mod can be comfortably picked up from any position. The Tribeaut is not biased to what the finger the vaper uses, whether it's the pointer or the thumb the mod will fit perfectly in their hand. The Tribeaut box mod is powered by single 18650 battery (Not included) and features asMODus 80H chipset, which has max output power up to 80W in the variable wattage option or in programmable curve mode. The Tribeaut box mod also features accurate temperature control mode presets such as NI200 nickel / titanium / SS316 / SS317 along with fully adjustable TFR and TCR. The screen has ten levels of adjustable brightness and a puff counter.
Image
Original Dovpo Odin DNA250c 200W TC VW Box Mod original price$179.99, now only$149.99
The Dovpo Odin DNA250c TC VW Box Mod is compact and lightweight. Equipped with the worldwide known Evolve DNA250c Chip, it is a hard wearing and user-friendly chip that can connect to the computer for slight fine-turning and the theme modifications (Although a custom theme is already installed). The box mod is powered by dual 21700 batteries (Not included), which make the mod still maintains a small and ergonomic form. Furthermore, the box mod also provides various of safety functions: reverse polarity protection, atomizer protection, overheat protection.
Image
Terk V2 RDA Clone + 1 Spare 25mm Diameter Top Cap with BF Pin $12.99
The TERK V2 24mm Squonk RDA Clone creatively crafted for building enthusiasts, implementing a large two-post clamp configuration with AFC constructed onto the build deck and comes with two top cap options: 24mm and 25mm. The TERK V2 style RDA supports dual coil configuration on the expansive space of the build deck, calling on the clamping systems, top secured, to affix performance coils within the appropriate terminals. The dual slotted airflow system can be found on the mid cap, sending airflow from the side of the tank to the side of the coil, creating dense flavorful clouds. The additional support of two top cap options allows for user-customization and preference with squonk 510 pin to match best squonk mods.
Image
Original Aspire Tigon 1300mAh AIO Pod System Starter Kit $29.99
The Aspire Tigon AIO Pod Kit is powered by a 1300mAh built-in battery and comes with two types of coils: 0.4ohm coil (23~28W) and 0.7ohm mesh coil (20~25W) and a 4.6ml juice capacity pod cartridge. The Tigon AIO Pod Kit supports Adjustable airflow control that can meet different vaping needs.
Image
Original WISMEC Replacement WR01 Mesh Coil Head for Preva Pod Cartridge / Kit $2.99
The WISMEC Replacement Mesh Coil Head is designed for WISMEC Preva Pod Cartridge / Preva Kit, it features 0.6ohm coil resistance (Mesh).
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with 0.25ohm SS316 Dual Coil - Childproof Version $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with SS316 Dual 0.25ohm Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable. This is Childproof Version.
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with 0.6ohm WR01 Mesh Coil - Childproof Version $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with WR01 0.6ohm Mesh Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable. This is Childproof Version.
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with KTR 0.5ohm Coil - Childproof Version $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with KTR 0.5ohm Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable. This is Childproof Version.
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with 0.25ohm SS316 Dual Coil $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with SS316 Dual 0.25ohm Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable.
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with 0.6ohm WR01 Mesh Coil $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with WR01 0.6ohm Mesh Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable.
Image
Original WISMEC Preva Kit Replacement Pod Cartridge with KTR 0.5ohm Coil $5.99
The WISMEC Preva Replacement Pod Cartridge is designed for WISMEC PREVA Kit. It's a 3ml atomizer with KTR 0.5ohm Coil. It will satisfy both DL lovers and MTL pursuers. What' more, it adopts adjustable top-airflow system to prevent e-juice leakage effectively and makes the vaping experience incomparable.
Image
Original Vaporesso Sky Solo Plus Tank / Kit Replacement Bubble Tank Tube $1.99
The Vaporesso Replacement Bubble Tank Tube is designed for Sky Solo Plus Kit. It comes with a large 8ml juice capacity.
Image

Gina
veteran
Posts: 912
Joined: Tue Jun 07, 2016 9:53 am
China

Re: 3fvape

Post by Gina » Wed Nov 06, 2019 4:41 am

Original Vaporesso GEN 220W TC VW Box Mod $45.99
The Vaporesso GEN Mod comes with an innovative casing which features 4 layers of coating, giving it soft rubber-like feel, yet still making it smooth to the touch. The final coating makes it scratch-proof and flame retardant. Powered by dual 18650 batteries and assisted by the advanced AXON chipset, the mod can fire from 5W to 220W whilst it implements the pulse mode and the power ECO mode. In the pulse mode, AXON will continuously give you a hit throughout your puff (every 0.02s) - not just from the initial fire - bringing you more powerful, flavorful clouds with every puff. When the power ECO mode is on, it can optimize your device's settings to give you that extra vaping time you need. At last, there is a 0.91" OLED screen to show the essential vaping data clearly.
Image
Original FreeMax Mesh Pro Sub Ohm Tank Clearomizer $22.99
The Freemax Mesh Pro is constructed from stainless steel (body) + pyrex glass (tank tube) in 25mm diameter, the Sub Ohm Tank is compatible with the 0.12ohm SS316L Single Mesh Coil (400~550'F), 0.15ohm Kanthal Single Mech Coil (40~70W), 0.2ohm Kanthal Double Mesh Coil (60~90W), 0.15ohm Kanthal Triple Mesh Coil (80~110W). Also, it supports slide-to-open top fill design, 360 degree e-liquid feeding, the Freemax Mesh Pro offers a stylistic design and great flavor compared to all the other mesh coil sub ohm tanks in the market.
Image
YFTK Caiman MTL RDTA Clone $23.99
The YFTK Caiman MTL RDTA Clone is constructed from 316 stainless steel (body) and PC (tank) in 22mm diameter. The RDTA supports air feed adjustment, coming with a adjustable central connector screw and it is esay to E-liquid tank filling. Also, the RDTA can replaceable air pipes with different diameters. The inner surface of the atomizing chamber cap has a hemispherical shape which can hold some amount of liquid when the atomizer is turned over (similar to a no-spill cup). What's more, Milled stands is easy for coil clamping.
Image
ShenRay Vapor Giant VG Kronos 2S DL / MTL RTA Clone(23mm) $29.90
The ShenRay Vapor Giant VG Kronos 2S RTA Clone is constructed from 316 Stainless Steel (Body) and PC (Tank Tube) in 23mm Diameter. The RTA comes with a 4ml juice capacity PC tank tube and 360 degrees Logo Shield. Also, the RTA supports bottom adjustable airflow and MTL (MTL opening: 2 x 0.8mm) or restrictive DL (DL opening: 4 x 1.8mm) vaping experience. What's more, it comes with a childproof topcap and leakproof design, too.
Image
ShenRay Vapor Giant VG Kronos 2S DL / MTL RTA Clone(25mm) $33.90
The ShenRay Vapor Giant VG Kronos 2S RTA Clone is constructed from 316 Stainless Steel (Body) and PC (Tank Tube) in 25mm Diameter. The RTA comes with a 4.5ml juice capacity PC tank tube and 360 degrees Logo Shield. Also, the RTA supports bottom adjustable airflow and MTL (MTL opening: 2 x 0.8mm) or restrictive DL (DL opening: 4 x 1.8mm) vaping experience. What's more, it comes with a childproof topcap and leakproof design, too.
Image
Original SMOKTech SMOK RPM40 40W 1500mAh VW Mod Pod System Starter Kit $31.99
The SMOKTech SMOK RPM40 Pod Mod Kit is an ultra-portable pod mod that shapes like a cuboid and is covered with glossy finish and characteristic material, making the whole device look fancy and stylish. It is small in size but has a battery capacity of 1500mAh which can ensure enough running time and help you avoid frequent charging, and a power range from 1W to 40W for you to adjust, and you can press the UP / DOWN button to get your preferred power. The internal IQ-R chip is a new one, which can shorten the firing time to 0.001S, and charging time to two hours. Different from normal tiny and slim pod devices, RPM40 is designed with a 0.96 inches screen, with which, detailed vaping data is clearly presented, like the wattage, resistance, voltage, screen color, puff number, and battery level. Besides, the newly designed RPM Mesh 0.4ohm Coil and Nord DC 0.6ohm Coil are designed for the best flavor and excellent vapor production.
Image
Original Vaporesso GEN 220W TC VW Box Mod with SKRR-S Tank Kit $58.99
The Vaporesso GEN 220W Vape Mod and SKRR-S Mesh Sub-Ohm Tank Starter Kit is a high power device designed to be used by newbies and pros alike. GEN presents a sleek and light weight design, paired with the new AXON chip for easy operation. The new AXON chip from Vaporesso is an intuitive chipset with a simple user interface and several power modes to please every user. Vaporesso has paired the GEN with the SKRR-S tank for the ultimate vape starter kit.The Vaporesso GEN mod is constructed from durable aluminum and features a soft touch finish made from four layers of coating. This allows the vape device to have a soft rubber-like feel, while offering extreme durability.
Image
[Ships from Battery Warehouse]Original AWT IRM 1200mAh 18A 18500 High Drain Rechargeable Battery for Mod / Mod Kit(2 PCS) $4.99
The AWT IRM 18500 Battery is a 1200mAh high performance High Drain Rechargeable Battery and made for high continuous discharge current (max 18A) applications. It is compatible with any E-cig vaping mods / mod kit powered by 18500 batteries. 2 PCS / Pack.
Image
Original Auguse MTL RTA Replacement Top Cap Tank Tube $7.99
The Auguse Replacement Top Cap Tank Tube is designed for Auguse MTL RTA Atomizer, it is made of PC material and comes with 4ml juice capacity.
Image

Post Reply